<


AxeTrak® B3'6

Not Just Another Bass Cabinet . . .                                
                                                           It's the Ultimate Bass Cabinet

                

The AxeTrak® B3'6 is in a league of it's own. It was designed to satisfy the discriminate working bassist that demands a rock solid cabinet, with well balanced bass tones. As an added feature, this cabinet is equipped with a low impedance output that enables the user the flexibility to record or mic the sound of their amp without disturbing the peace. 

Never again be caught on stage without a DI or microphone to amplify or record the sound of your live rig. This cabinet comes complete with all the right stuff. The AxeTrak B3'6 has a built in, custom designed dynamic microphone mounted inside the in-cabinet AxeTrak recorder for bass guitar. 

Just plug in a low impedance microphone cable and you're ready to go. With this cabinet you will be able to rock the stage and provide the sound engineer with a true low impedance mic'd output. After the gig, fllick the switch and instantly go into silent mode for real mic'd recording in the wee hours of the night. This little beast does it all!

The AxeTrak® B3'6
Configured with one 15" bass driver and 3 custom designed 6” bass drivers to reproduce ground shaking lows, nice highs and lots of punch and presence. All speakers manufactured by Eminence Speaker.
Comes complete with in-cabinet AxeTrak® for  self-contained quiet recording and stage miking. No need to ever need a direct box again. Cabinet can be manually switched between Mode 1- (15” and 3 x 6" speakers w/AxeTrak, total impedance 4 ohms) and Mode 2- (AxeTrak® only, total impedance is 8 ohms).
Totally isolates the bass guitar from other live instruments when used as a direct box for live performances. This adds to a
cleaner mix with better separation.
Handmade and constructed from ¾”, high quality birch plywood for superior strength, warmth, and the best possible tone.
Cabinet is designed to handle up to 550 watts rms in Mode 1 and 75 watts rms in Mode 2.
Cabinet is a sound engineers dream. It enables the bass guitar to be run through the house sound system without the use of a direct box. Not to mention it has the warmth of a true mic'd amplifier, not a lifeless line out jack.

Cabinet comes complete with 2 1/2", soft rubber, removable casters for a guaranteed smooth roll.
Cabinet is covered in heavy-duty black tolex  


The in-cabinet AxeTrak® gives you all of the same benefits as the original stand alone AxeTrak® recorder for bass guitar. It captures the true mic’d sound of any bass amp. The AxeTrak® uses a high-end 6” driver, manufactured exclusively for this product by Eminence Speaker. The sound radiating from this speaker is converted into an electrical signal with the use of a special dynamic microphone cartridge, which has been carefully selected and modified for this unique application. The cartridge is meticulously placed and permanently mounted inside the enclosure to produce the best possible variety of USABLE bass guitar tones. The onboard AxeTrak® also features an easy access "Deep Plug" that can be easily removed for ultra deep bass response if desired.

 The in-cabinet AxeTrak® is very easy to use. Simply connect the speaker jack of any bass guitar amp to the input jack of the speaker cabinet®. Then plug a low impedance microphone cable into the XLR output jack of the AxeTrak®, and plug the other end directly into a recording console, mixing board, or computer soundcard. Never again be caught on stage without a mic or direct box for your rig. The recorded or mic’d sound coming from the low impedance balanced output of the AxeTrak® is totally awesome!!! Deep lows and crisp clean highs are easily obtained with little or no effort. Your ears won’t believe what they are hearing. Your home recordings will sound better than ever, and better yet, your neighbors will never hear a thing.


Size: 28.25” (717mm) width, 15.25” (387mm) depth, 30.75” (781mm) height with casters
Weight: 98 lbs.

There is currently a 1 month delivery on this product as all of our AxeTrak® B3'6 cabinets are handmade to order. If you are interested in purchasing one or more of these revolutionary bass guitar cabinets please send an email message to axetrak@jlhproducts.com with a daytime phone number, and you will be contacted within one business day.

Factory Direct Price: $1,339.00 plus $75.00 shipping and handling (Continental U.S. only)


Contact Us at

axetrak@jlhproducts.com

JLH Products
PO Box 544
Lake Forest, CA 92609
Tel: 949-859-7293
Fax: 949-859-1248

Copyright © 2002 JLH Products. All Rights Reserved