<


AxeTrak® 312

It's the Ultimate Stage and Home Recording Cabinet for Rock Guitarists!!!

               

The AxeTrak® 312 is one of the most revolutionary guitar cabinets of it's time. It was designed specifically for the working guitarist that needs a punchy rock cabinet, and wants to record the sound of their amp without disturbing the peace. This cabinet is a sound engineers dream. Never again be caught on stage without a microphone to amplify or record the sound of your live rig. This is literally one cabinet that you can crank all night. The AxeTrak 312 has a built in, custom designed dynamic microphone mounted inside the in-cabinet AxeTrak isolation cabinet. Just plug in a low impedance microphone cable and you're ready to go.

The AxeTrak® 312
Comes complete with in-cabinet AxeTrak® for self-contained quiet recording and stage miking. Cabinet can be manually switched between mode 1- (3 x 12” speakers w/Axetrak) and mode 2- (AxeTrak® only). The impedance remains 8 ohms regardless.
Configured with three 12” Eminence Governor TM speakers for that thick raunchy British tone.
All Speakers slant slightly upward for better stage monitoring.
Handmade and constructed from ¾”, high quality birch plywood for superior strength, warmth, and the best possible tone.
Cabinet has a tuned ½” thick back, for deeper tone and low-end punch.
Cabinet is designed to handle up to 200 watts rms in Mode 1, and 75 watts rms in Mode 2.
Cabinet comes complete with 2 1/2", soft rubber, removable casters for a guaranteed smooth roll.
Cabinet is covered in heavy-duty Ivory Tolex with black hardware. Black is also available if requested.



The in-cabinet AxeTrak® gives you all of the same benefits as the original stand alone AxeTrak® isolation cabinet. It captures the true mic’d sound of any high gain, overdriven or distorted guitar amp. The AxeTrak uses our custom designed AxeTrak® brand heavy-duty 6.5" speaker. The sound radiating from this speaker is converted into an electrical signal with the use of a special dynamic microphone cartridge, which has been carefully selected and modified for this unique application. The cartridge is meticulously placed and permanently mounted inside the enclosure to produce the best possible variety of USABLE guitar tones. The onboard AxeTrak® also features an easy access "Deep Plug" that can be easily removed for ultra deep bass response if desired, and a “High Frequency Roll-Off Switch” for guitarists that want more of a fat, off-axis type sound, with less sizzle.

AxeTrak® Isolation Cabinet for Guitar
Enables recording of thick rock rhythms and screaming lead guitar tones without being heard by your neighbors.
Solves the problem of having to record at ear blistering levels to capture the natural sounding distortion and overdrive produced by the speaker of a loud guitar amp.
The AxeTrak® is 100% analog and produces a warm yet raw sounding guitar tone. It does not sound fake, sterile or processed, like many amp modeling devices used for home recording and professional recording on the market today.
Eliminates interference and the possibility of unexpected background noises affecting the recording of guitar tracks.
Provides a great sounding alternative for any guitarist wanting to record the sound and characteristics of their live rig (amp, pedals, racks, and other devices) but not wanting to haul around the speaker cabinets.
Totally isolates the guitar from other live instruments when used as a direct box for live performances. This adds to a cleaner mix with better separation.
Helps eliminate feedback problems caused by high gain double coil pickups. 
Totally portable and does not require a power supply or battery. This device is extremely reliable and is not sensitive to voltage spikes and changes in AC power lines like digital signal processors. The AxeTrak® is a sturdy workhorse for the studio guitarist.
Makes a perfect late night practice speaker cabinet. You get the sound and feel of your live rig but at a level not much louder than a whisper.
Can provide a quiet rehearsal solution for any amplified band.  
It is the perfect load for doing amplifier repairs as opposed to a dummy load resistor. It allows you to hear what's going on with the amplifier while testing it.  


The AxeTrak® 312 is very simple to use. Simply connect the speaker jack of any high gain guitar amp to the input jack of the AxeTrak®. If you wish to mic or record your rig just plug a low impedance microphone cable into the XLR output jack on the back of the cabinet. Plug the other end of the mic cable directly into a recording console, mixing board, or computer soundcard. The audible sound radiating from the in-cabinet AxeTrak® is that of a whisper, while the recorded or mic’d sound coming from the low impedance balanced output is pure rock tone. This cabinet enables the guitarist to hit it hard and heavy on stage, while providing a true mic'd output for the sound engineer. When the gig is over, simply hit the toggle switch on the back of the cabinet and you are now in silent mode. You can record thick rock rhythms and screaming leads anytime, day or night. The neighbors will never hear a thing. The AxeTrak® is revolutionizing the way overdriven and distorted guitar tracks are being recorded.

Size: 28.25” (717mm) width, 12.25” (311mm) depth at top - 15.25” (387mm) depth at bottom, 30.75” (781mm) height with casters,
Weight: 96 lbs.

There is currently a 1 month delivery on this product as all of our AxeTrak® 312 cabinets are handmade to order. If you are interested in purchasing one or more of these revolutionary guitar cabinets please send an email message to axetrak@jlhproducts.com with a daytime phone number. You will be contacted within one business day.

Factory Direct Price: $1,339.00 plus $75.00 shipping and handling (Continental U.S. only)


Contact Us at

axetrak@jlhproducts.com

JLH Products
PO Box 544
Lake Forest, CA 92609
Tel: 949-859-7293
Fax: 949-859-1248

Copyright © 2002 JLH Products. All Rights Reserved