AxeTrak 112 guitar cabinet for stage, professional and home recording

AxeTrak® 112

Hands Down ... The Most Versatile Isolation/Speaker Cabinet There Is!!!

The AxeTrak® 112 is one of the most revolutionary guitar cabinets of it's time. It comes stock with one front loaded 12" Eminence Governor speaker for stage monitoring, in addition to having our AxeTrak isolation cabinet permanently mounted inside its enclosure for direct micing or recording. The AxeTrak® 112 has a dual input impedance that can be easily switched between 4 ohms and 16 ohms and can handle 100 watts rms in either mode. This cabinet is perfect for the working musician that occasionally needs a 1 x 12 cabinet, occasionally needs to record the sound of their amp without disturbing others, occasionally needs to perform in a quiet stage environment running through the house sound system. It was designed specifically for the working guitarist that needs a punchy solid cabinet, but still needs to be able to record the sound of their amp without disturbing the peace. This cabinet offers several benefits over traditional cabinets as well as other traditional isolation cabinets. Never again be caught on stage without a microphone to amplify or record the sound of your live rig. The AxeTrak 112 has a built in, custom designed dynamic microphone mounted inside the in-cabinet AxeTrak isolation cabinet. Just plug in a low impedance microphone cable and you're ready to record or run through the house sound with perfect isolation from the other musical instruments on stage.

The AxeTrak® 112
Comes complete with in-cabinet AxeTrak® for self-contained quiet recording and stage miking. Cabinet can be manually switched between mode 1- (1 x 12” speakers w/Axetrak) and mode 2- (Internal AxeTrak® only). Whichever mode you select, the impedance will stay the same.
Comes stock with one 12” Eminence Governor TM speaker for a thick, raunchy, British tone with good articulation.
Cabinet has dual input impedance selector switch that toggles between either 4 ohms or 16 ohms.
Handmade and constructed from ¾”, 13-ply Baltic Birch plywood for superior strength, warmth, and the best possible tone.
Cabinet has a ½” thick back, for deeper tone and low-end punch. The back of the cabinet is predominantly closed but with a 6" breather hole to loosen the damping of the speaker and provide a more open sound.
Cabinet will handle 100 watts rms in either Mode.
Cabinet totally isolates the guitar from other live instruments when used as a direct box for live performances. This adds to a cleaner mix with much better separation.
Cabinet is covered in heavy-duty Ivory Tolex with black hardware and silver trim. Black is also available if requested.

The in-cabinet AxeTrak® gives you all of the same benefits as the original stand alone AxeTrak® isolation cabinet. It captures the true mic’d sound of any high gain, overdriven or distorted guitar amp. The AxeTrak uses our custom designed AxeTrak® brand heavy-duty 6.5" speaker. The sound radiating from this speaker is converted into an electrical signal with the use of a special dynamic microphone cartridge, which has been carefully selected and modified for this unique application. The cartridge is meticulously placed and permanently mounted inside the enclosure to produce the best possible variety of USABLE guitar tones. The onboard AxeTrak® also features an easy access "Deep Plug" that can be easily removed for ultra deep bass response if desired, and a “High Frequency Roll-Off Switch” for guitarists that want more of a fat, off-axis type sound, with less sizzle.

AxeTrak® Isolation Cabinet for Guitar
Enables recording of thick rock rhythms and screaming lead guitar tones without being heard by your neighbors.
Solves the problem of having to record at ear blistering levels to capture the natural sounding distortion and overdrive produced by the speaker of a loud guitar amp.
The AxeTrak® is 100% analog and produces a warm yet raw sounding guitar tone. It does not sound fake, sterile or processed, like many amp modeling devices used for home recording and professional recording on the market today.
Eliminates interference and the possibility of unexpected background noises affecting the recording of guitar tracks.
Provides a great sounding alternative for any guitarist wanting to record the sound and characteristics of their live rig (amp, pedals, racks, and other devices) but not wanting to haul around the speaker cabinets.
Totally isolates the guitar from other live instruments when used as a direct box for live performances. This adds to a cleaner mix with better separation.
Helps eliminate feedback problems caused by high gain double coil pickups.
Totally portable and does not require a power supply or battery. This device is extremely reliable and is not sensitive to voltage spikes and changes in AC power lines like digital signal processors. The AxeTrak® is a sturdy workhorse for the studio guitarist.
Makes a perfect late night practice speaker cabinet. You get the sound and feel of your live rig but at a level not much louder than a whisper.
Can provide a quiet rehearsal solution for any amplified band.
It is the perfect load for doing amplifier repairs as opposed to a dummy load resistor. It allows you to hear what's going on with the amplifier while testing it.

The AxeTrak® 112 is very simple to use. Simply connect the speaker jack of any high gain guitar amp to the input jack of the AxeTrak®. If you wish to mic or record your rig just plug a low impedance microphone cable into the XLR output jack on the back of the cabinet. Plug the other end of the mic cable directly into a recording console, mixing board, or computer soundcard. The audible sound radiating from the in-cabinet AxeTrak® is that of a whisper, while the recorded or mic’d sound coming from the low impedance balanced output is pure rock tone. This cabinet enables the guitarist to hit it hard and heavy on stage, while providing a true mic'd output for the sound engineer. When the gig is over, simply hit the toggle switch on the back of the cabinet and you are now in silent mode. You can record thick rock rhythms and screaming leads anytime, day or night. The neighbors will never hear a thing. The AxeTrak® is revolutionizing the way overdriven and distorted guitar tracks are being recorded.

Size: 26” (660mm) width, 18” (457mm) high, 13.25" (336mm)
Weight: 61 lbs.

If you are interested in purchasing one or more of these revolutionary guitar cabinets please send an email message to axetrak@jlhproducts.com with a daytime phone number. You will be contacted within one business day.

Factory Direct Price: $825.00 plus shipping and handling (Continental U.S. only)

Contact Us at
axetrak@jlhproducts.com

JLH Products
PO Box 544
Lake Forest, CA 92609
Tel: 949-859-7293
Fax: 949-859-1248